|
Instrument Database:
Organomation Associates Inc. - S-EVAP-KD Solvent Evaporators for Sample Concentration
| |
|
|
| |
|
| |
|
| Year of introduction |
|
| Status |
available |
| Company |
Organomation Associates Inc.
|
| Categories |
Sample preparation: Evaporators
|
The instrument consists of a base and stand assembly, mounted in a deep bath. The entire instrument rotates so that all samples are accessible from the front. Kuderna-Danish flasks sit on a cover disk with attached concentrator tubes immersed in the bath water. Solvents with boiling points up to 65° C can be handled. For maximum beat transfer, jar shaped flasks can be immersed directly into the bath water. An optional vacuum manifold permits solvents with boiling points up to 90° C to be processed.
The condenser water supply includes a flow inner, rigid supply tube, rotating inlet/drain port, parallel supply/return manifolds and a flexible return tube. Quick-disonncct fittings are used on the manifolds The system can be connected to a bench coldwater tap. A refrigerated water chiller is recommended as an accessory for improved control of condenser temperature and water conservation.
The 8.5-inch deep, stainless steel water bath is thermostatically controlled and will accurately maintain water temperature from 30° to 100° C.It is equipped with a water level device, a high temperature limit switch and a GFCI electrical plug for safety. An intrinsically safe, purged case is available as an option. The bath is UL/CUL approved for laboratory use.
S-EVAP-KD Features:
- Eight models available in 5, 8 or 10 positions for 250 to 1000 ml Kuderna-Danish flasks.
- Insulated concentrator tubes delay evaporation to dryness. Non-insulated tubes also available.
- Choice of two solvent collection methods: Individual flasks at each condenser or one large central flask with tubing and fittings.
- Glassware is easily loaded and removed.
- Water manifold uses quick-disconnect fittings for easy set up and removal of condensers.
|
| Specifications |
|
|
|
|
