|
Instrument Database:
PANalytical B.V. - Manual Laboratory Press
| |
|
|
No picture !!
|
| |
|
| |
|
| Year of introduction |
|
| Status |
available |
| Company |
PANalytical B.V.
|
| Categories |
Sample preparation: Presses
|
|
Manually operated oil-hydraulic laboratory press, model TP. With this press all usual pressing occurring in laboratories can be executed. Pellets of various materials can be produced by using a special press tool, deliverable as a special accessory. The hydraulic pump is operated by means of the hand lever. The direction of motion of the press piston can be reserved by changing over the valve. The threaded spindle is intended for counter piece of the pressure absorption and for reduction of the idling stroke. A solid table to place the press on working height is included.
Specifications :
Maximum pressing capacity 20 tons
Maximim piston stroke approx. 40 mm
Net weight 130 kg excl. table
The following press tools are available :
Press tool made from Cr-steel, for TP press to be used with Al cups 40mm
Set of 2400 Al-cups for pressing 40 mm powders
Press tool made from Cr-steel, for free pressing
Press tool for pressing in steel rings 40 x 35 x 14 mm
Steel ring 40 x 35 x 14 mm
Press tool for pressing in steel rings 51,5 x 35 x 8.6 mm
Set of 25 steel rings 51.5 x 35 x 8.6 mm
|
| Specifications |
|
|
|
|
