|
Instrument Database:
Rocklabs Limited - Boyd-RSD Combo.
| |
|
|
| |
|
| |
|
| Year of introduction |
|
| Status |
available |
| Company |
Rocklabs Limited
|
| Categories |
Sample preparation: Mills, Grinders
Sampling: Sample devider
|
|
In a COMBO, two machines to devices are inter-connected so a samples goes through both as one process. The best example is Rocklabs Boyd-RSD Combo. In this combo, a sample is loaded into a Boyd Crusher. The crushed material falls into a vibrating feeder or onto a conveyor belt, which transport it to an RSD standing alongside the Boyd Crusher. The RSD splits out a portion for pulverising. COMBOs reduce handling, increase sample output, improve sample quality and reduce costs. COMBOs are not automated. Settings such as split percentage can be changed manually. COMBOs are produced in small batches to minimise cost, but there can be some modifications to suit each installation. For example, a Boyd-RSD Combo normally has the RSD on the right of the Boyd but this can be reversed. The price range of COMBOs is approximately USD10,000 to USD50,000. Features - Highly efficient. Crushing and splitting in one operation
- Maximum sample size of 55mm can be crushed to 2mm or less in one operation
- Two splits only – sample and remainder. Split can be set from 2% - 50%
- Feed rate up to 5kg per minute
- Easy adjustment of crushing fineness and split percentage
- Safety switches built in
- Air ducting built in for dust extraction
|
|
