|
Instrument Database:
Automated Fusion Technology - Phoenix - R Series
| |
|
|
| |
|
| |
|
| Year of introduction |
|
| Status |
available |
| Company |
Automated Fusion Technology
|
| Categories |
Sample preparation: Fusion
|
The R series is a smaller than the M series and is designed for lower sample out put. The Phoenix R series also uses a modular system of construction so that analysis can be optimised from a single sample model up to a 3-position machine.
Samples are dissolved and mixed into a lithium borate flux at temperatures ranging from 300 to 1600 degrees Celsius. (Typical fusion temperature is 1050 degrees Celsius) This is done over oxygen-enriched flames using specially designed burners. The sample is automatically poured into pre-heated moulds and cooled.
FEATURES:
- INDIVIDUAL BURNER SELECTION
- VARIABLE SPEED SWIRL ACTION
- FULLY REGULATED AIR COOLING (2 STAGE)
- RESET AT ANY TIME
- CAN BE USED AT HIGH ALTITUDE WITHOUT MODIFICATION
- SEPARATE MOULD HEATING
- CAN HEAT MOULDS UP TO 180GM
- AUTO-LOCK CRUCIBLE HOLDERS
- INDIVIDUAL BURNER MANIFOLDS
APPLICATIONS
Glass and ceramics industry. Bauxite/Alumina. Mineral sands industry. slag's, mattes sinters etc.
The steel industry, analysing iron ores, blast furnace slags and even magnesites.
Base metal (Pb, Zn, Cu, Ni) for the analysis of sulphides concentrates, Silicate University's and research organisation. The cement industry, analysing sand, limestone, kiln feed, clinker, milled meal etc..
AFT machines have also been used to successfully fuse Ferro alloy powders.
|
| Specifications |
|
|
|
|
