|
Instrument Database:
GAT - Gamma Analysen- Technik GmbH - DLC-10, DLC-10C, DLC-11C, DLC-10CP, and DLC-11CP Isocratic HPLC Systems
| |
|
|
No picture !!
|
| |
|
| |
|
| Year of introduction |
|
| Status |
available |
| Company |
GAT - Gamma Analysen- Technik GmbH
|
| Categories |
Chromatography: LC/HPLC
|
These are complete HPLC systems with an integrated UV-Vis Fixed Wavelength Detector for either 254nm or 280nm operation. Other wavelengths, dependent upon applications, are available by special order.
The DLC-10 is the lowest priced HPLC system in the market. This system employs a 254nm Hg lamp and power supply that does not permit up grading to any other wavelength.
The DLC-10C and 11C can operate to system pressures of 3000 PSI. They come equipped with the standard "PAEK™" valve. There is no pressure read out on these units. System pressure is obtained using the "Star-Chrom™" software when these systems are purchased as automatic isocratic (DIS-10/11) or gradient systems (DGS-10/11) or the new Star-Chrom Lite™ software when the instrument is fitted with a pressure transducer.
The DLC-10CP and DLC-11CP can operate to system pressures of 5000 PSI with the standard 10.0ml pump head. These instruments have front panel read out of pressure and a position-sensing valve as standard features. The "CP" instruments are priced slightly higher than the "C" instruments. The "C" and "CP" configurations can be up-graded to other available wavelengths. The high-pressure systems are available in SS construction only.
All the standard fixed wavelength systems can be obtained in either "SS" or "PEEK"" configurations for the same price.
All of the above systems come standard with either a PEEK or SS analytical flowcell dependent the users option. A preparative flowcell, semi-preparative flowcells and a microbore flowcell are also available.
The pumping system on all the instruments is a high quality single piston pump with a built in pulse damper. A two-stage injection valve with a 20µl loop is standard.
Detector analog voltages for data acquisition are located at the rear of the instruments, and include a remote capability for selecting absorbance ranges via contact closures. The pump has an RS-232 jack for acquiring pump information. Pump flow rates are from 0.01ml to 10ml.
|
| Specifications |
|
|
|
|
