|
Component Database:
Glass Expansion - Niagara Rapid Rinse Accessory
| |
|
|
| |
|
| |
|
| Year of introduction |
|
| Status |
historical ( out of sale ) |
| Company |
Glass Expansion
|
| Categories |
Liquid flow systems: valves
|
This is what the new Glass Expansion Niagara Rapid Rinse Accessory achieves.
The Niagara begins the rinsing of the nebulizer and spray chamber the instant the sample measurement is completed and continues to rinse until the next sample is ready. Thus the rinse is carried out in the time that is usually wasted waiting for the sample and the rinse solutions to flow from the autosampler to the nebulizer.
The Niagara incorporates an electronically controlled switching valve and the parts of the valve in contact with the sample are made entirely of Teflon and PEEK for maximum chemical resistance. During the sample measurement time, the rinse solution is pumped through the valve to waste.
The benefits of the Niagara for the busy ICP laboratory are:
- Faster sample turn around time
- More productivity for your ICP
- Argon costs are reduced
|
| Specifications |
|
|
Environmental Niagara is only suitable for indoor use under the following categories (EN 61010-1): - Installation category II
- Pollution Degree 2
- Safety Class 1
Environmental installation specifications for operation are: - 0-3030 m (0-10 000 ft) altitude
- 10-45 degrees Celsius
- 8-80% relative humidity, non condensing
Niagara Dimensions | Width | Depth | Height | Weight | 54mm | 110mm | 177mm | 640grams |
Adjustable Mounting Bracket Dimensions | Width | Depth | Height | Weight | 80mm | 100mm | 150mm | 315grams |
2 Channel Peristaltic Pump Dimensions | Width | Depth | Height | Weight | 100mm | 120mm | 75mm | 550grams |
Regulatory Compliances Niagara Power Requirements - Mains power 100-240V, 1.5A, 50-60Hz
- Adaptor provided, output:
24 VDC Regulated, 1.8 Amp
GE 2 Channel Peristaltic Pump Power Requirements - Power provided by Niagara:
24 VDC Regulated, 250mA
5 VDC Regulated, 100mA
Packing List - Niagara Valve Actuator and Valve
- 24V DC 1.8Amp Regulated power supply
- 1.5m FEP 1/16"OD, 0.020"ID Tubing
- Four Flangeless 1/4"-28 fittings and Ferrules
- Adjustable Mounting Bracket
- IEC C13 Power Cable (configured for country of destination)
- Autosampler Kit (configured for particular autosampler)
|
Related links:
|
