|
Instrument Database:
NuAire Corp. - NU 156 Vertical Laminar Flow Wet Process Fume Hood
| |
|
|
| |
|
| |
|
| Year of introduction |
|
| Status |
available |
| Company |
NuAire Corp.
|
| Categories |
Laboratory facilities: Extractor hoods
|
The NU 156 is the first choice in a Vertical Laminar Flow Wet Process Fume Hood for High Acid use:
- 100% Poly-Pro seam welded construction
- longer lasting, metal free construction
- Ergonomic Design large work space, clear view
- Personnel and Product Protection with 100% clean air HEPA filtration and true laminar Air Flow
- Flexible Design and optional use of other thermoplastics so you get a Fume Hood built to your unique specifications
Join the laboratory professionals that have made the NU 156 the first choice in a Vertical Laminar Flow Wet Process Fume Hood for High Acid use. Standard Features
- HEPEXTM Zero Leak Air Flow System
- Large HEPA Filters: 99.99% Efficient On 0.3 Microns
- Separatorless HEPA Filter Media (i.e. NO Aluminum Separators)
- Totally Polypropylene Enclosed with Lexan Cover external fluorescent Lighting: 100
- Foot-Candles (1076 LUX)
- Totally Polypropylene Enclosed Electronic Low-Heat Fluorescent Ballast
- Front Filter Removal, WITHOUT Removing View Screen
- Sliding Lexan View Screen: 19 1/2" (495mm) Maximum Opening to Fully Closing
- Standard 10-inch (254mm) Access Opening at 105 LFPM
- Removable Work Surface/Inlet Grill
- PVC Diffuser Over Supply HEPA (in lieu of metal)
- 1/4-inch (6 mm) Lexan With Marguard View Screen
- PVC View Screen Wiper
- PVC Encased Window Counter Balance with Polypropylene Ropes and Pulleys
- A Vented and Plumbed Spill Trough Plenum under work surface
- 1/2-inch Polypropylene Blower/HEPA Filter Module
- Teflon Coated Backward Inclined High Capacity Motorized Impeller (Includes Teflon Coated Hardware)
- 1/2-inch Stress Relieved All Seam Welded Polypropylene Work Zone
- Flush Mounted Interior/Exterior Access Panels
- Modular Electrical Component Construction Sealed In Polypropylene Case With Access Panel
- Polypropylene Control Center Plate
- Solid State Motor Voltage Regulator
Optional Features
- Ground Fault Circuit Interrupter for Duplex Outlet
- Remote Controlled Service Valves For Gas, Air, Vacuum available In PVC, PVDF
- Teflon or Polypropylene*
- Additional Duplex Outlet(s) with PVC Covers
- Magnehelic Gauge to Monitor Supply Plenum Housed In a Polypropylene Housing with Lexan window
- Cascade Rinse Tanks with Nitrogen purge
- Air Flow Alarm Systems
- Exhaust Interlocks for building controls
- Vented Base Support Stands
- DI or N2 Teflon Spray Guns
- Teflon, PVDF, or Polypropylene Dip Tanks with or without drains
- Polypropylene or PVDF sinks with Hot/Cold or DI Water Faucets
- Teflon Liquid/Air Aspirators to syphon chemicals
- ULPA Filters: 99.999% Efficient On 0.12 Micron Particles
- Fully Perforated Work Surface (10% Open)
- Polypropylene Rectangle-to-Round Exhaust Transitions
- Custom Polypropylene Sinks with Chemically Resistant "P"-Trap
The unit can be shipped either fully assembled via Van Lines or "knocked down" in two cartons and sent via common carrier (assembly required).
|
|
