|
Instrument Database:
Ismatec SA - Reglo Digital - Microprocessor controlled dispensing pump
| |
|
|
| |
|
| |
|
| Year of introduction |
|
| Status |
available |
| Company |
Ismatec SA
|
| Categories |
Sample introduction: Peristaltic pump
|
|
Characteristics: - compact multi-channel tubing pump
- for low-flow, multi-channel fluid transfer and
dosing or filling applications - 6, 8 and 12 roller rotors for extremely low pulsation
- 6 operating modes and calibration functions
- MS/CA Click'n'go cassettes providing defined and
reproducible occlusion conditions - remote controllable via PC (RS232)
|
| Specifications |
|
| Tubing type | 3-stop color-coded tubing, 0.13–3.17 mm i.d. (2 channels)
3-stop color-coded tubing, 0.13–3.17 mm i.d. (4 channels) | | Tube-bed | MS/CA Click'n'go cassettes- simple handling
- automatic occlusion setting
- defined and reproducible occlusion conditions
- each channel allows individual tubing selection | | Operating panel | - 6-button membrane key-pad
- LED display | | Operating modes | - pumping by drive speed (rpm)
- pumping by flow rate (ml/min)
- factory-set flow rates for all available tube sizes
- dispensing by volume (ml)
- dispensing by time (0.1s up to 999hrs)
- dispensing by volume within a pre-set time
- interval dispensing by volume with a pause
- interval dispensing by time with a pause
- setting the number of dispensing cycles
- pause time setting (from 0.1s up to 999hrs)
- roller back-steps for drip-free dispensing
- reversible rotation direction | Calibrating
function | - for flow rate (ml/min)
- for dispensing volume (ml) | | Rotor speed | - 1.6 – 160 rpm (2-channel versions)
- 1.0 – 100 rpm (4-channel versions
- adjustable in steps of 0.1 rpm | | Speed setting | digital speed setting | | Speed control | closed loop control for pressure independent speed | RS232
interfaces | RS232 "in" - for operation controlling via PC
RS232 "out" - for cascading up to 8 pumps | Digital input
(TTL level) | Run/Stop, autostart | | Analog output | Speed monitoring (0–8 kHz = 2 channel version,
0–5 kHz = 4 channel version) | Differential
pressure | 1.0 bar (14.5 psi) possible (depending on tubing material);
small tubing diameters and/or cassettes with pressure lever allow higher pressures | | Motor type | DC motor | | Power supply | 115/230VAC; 50/60Hz; 20 W
| | Protection rating | IP 30 | Depth/Width/
Height | 178x100x135 mm (7"x4"x5 3/10")=2-channel version
190x100x135 mm (7½"x4"x5 3/10")=4-channel version | | Weight | 2.0 kg (5 lb) (2-channel versions)
2.1 kg (5 lb) (4-channel versions) | | Accessories | - Cassettes
- Foot switch
- Driver for "LabView" software (free download) |
|
|
