|
Instrument Database:
Prince Technologies B.V. - PrinCE 400 Series Capillary Electrophoresis System
| |
|
|
| |
|
| |
|
| Year of introduction |
|
| Status |
historical ( out of sale ) |
| Company |
Prince Technologies B.V.
|
| Categories |
Separation: Electrophoresis, Capillary
|
PrinCE 450, PrinCE 460, PrinCE-C 455 and PrinCE-C 465:
The routine analysers
The PrinCE 450, PrinCE 460, PrinCE-C 455 and PrinCE-C 465 are the routine analyser capillary electrophoresis systems. These PrinCE systems are fully automated and can handle up to 32 (or optional 40) samples without interference of the operator, while still maintaining 10 (or optional 5) buffer vials. Any combination of six segments (sample/buffer type) can be used. The operator can exchange the segments easily without needing any tools. The PrinCE 460 and PrinCE-C 465 offer the extra possibility of samples and buffers cooling. The PrinCE-C 455 and 465 are offering the possibility for external pressure up to 10 bars.
The extra features of PrinCE-C 455 and PrinCE-C 465, compared to the PrinCE 450 and PrinCE 460:
- The effective capillary length is reduced by 5 cm.
- High pressure up to 10 bars by gas pressure allows CEC and faster rinsing with buffers of high viscosity (or: use of buffers with even higher viscosity, use of high viscosity buffers in narrower i.d. capillaries).
The extra features of PrinCE 460 and PrinCE-C 465, compared to the PrinCE 450 and PrinCE-C 455:
- Samples and Buffers cooling
|
| Specifications |
|
Specifications of the routine analyser PrinCE 450 and 460
| Details | | Injection modes | Hydrodynamic injection uses patended Dynamic Compression Injection (DCI) to generate and apply a range of positive and negative pressures with controlled ramping (-180 to 250 mbar, 1 mbar resolution). Electrokinetic injection features controlled ramping in voltage or current mode (max. 30 kV) | | Flushing pressure | 0 to +3000 mbar by DCI device | | Voltage range | -30 kV to +30 kV | | Current range | -200 µA to + 200 µA | | Ramping | Programmable voltage or current ramping | | Polarity reversal | Programmable pre-run and during the run | | Autosampler | 30/48 position carousel sample and buffer vials. Variable vial sizes of samples and buffers available, including Eppendorf micro centrifuge tubes. | | Buffer volume | Maximal 4 ml | | Sample volume | Minimal 10 µl, maximal 4 ml | | Temperature control | Samples & buffers cooling 4°C to 40°C (PrinCE 460 only). Capillary: 5°C below ambient to 60°C | | Capillary | Flexible in length and diameter depending on application or configuration | | Sophisticated features | Current or voltage controlled method step durations (for on-line pre-concentration). Positive or negative pressure during electrophoresis. | | Power requirement | 115/230 V, 50/60 Hz, 300 VA | | Dimensions | 50 x 50 x 54 cm (w x h x d) | | Weight | 35 kg | | Accessories | Outlet vial assembly, detector table, WinPrinCE control software and a start-up kit of sample, buffer vials and so on | | Detector | Allows the use of any CE- detector including UV/VIS, Fluorescence, Diode Array, LIF, Conductivity, Electrochemical and MS. | | Software | Allows the use of any data station. Optional: Our DAx Data Acquisition and Analysis software. This software is specially made for our PrinCE-systems |
Specifications of the routine analyser PrinCE-C 455 and 465
| Details | | Injection modes | Hydrodynamic injection uses patended Dynamic Compression Injection (DCI) to generate and apply a range of positive and negative pressures with controlled ramping (-180 to 250 mbar, 1 mbar resolution). Electrokinetic injection features controlled ramping in voltage or current mode (max. 30 kV) | | Flushing pressure | 0 to +2500 mbar by DCI device, up to 10 bar by external pressure | | Voltage range | -30 kV to +30 kV | | Current range | -200 µA to + 200 µA | | Ramping | Programmable voltage or current ramping | | Polarity reversal | Programmable pre-run and during the run | | Autosampler | 30/48 position carousel sample and buffer vials. Variable vial sizes of samples and buffers available, including Eppendorf micro centrifuge tubes. | | Buffer volume | Maximal 4 ml | | Sample volume | Minimal 10 µl, maximal 4 ml | | Temperature control | Samples & buffers cooling 4°C to 40°C (PrinCE 465 only). Capillary: 5°C below ambient to 60°C | | Capillary | Flexible in length and diameter depending on application or configuration | | Sophisticated features | Current or voltage controlled method step durations (for on-line pre-concentration). Positive or negative pressure during electrophoresis. | | Power requirement | 115/230 V, 50/60 Hz, 300 VA | | Dimensions | 50 x 50 x 54 cm (w x h x d) | | Weight | 35 kg | | Accessories | Outlet vial assembly, detector table, WinPrinCE control software and a start-up kit of sample, buffer vials and so on | | Detector | Allows the use of any CE- detector including UV/VIS, Fluorescence, Diode Array, LIF, Conductivity, Electrochemical and MS. | | Software | Allows the use of any data station. Optional: Our DAx Data Acquisition and Analysis software. This software is specially made for our PrinCE-systems |
|
Related links:
|
