Eksigent - NanoLC-Ultra HPLC system

Introducing the NanoLC-Ultra family of high pressure HPLCs that delivers superior gradient precision at pressures up to 10,000 psi.


The next generation NanoLC system from Eksigent promises to deliver high resolution separations, combined with excellent reproducibility, resulting in improved identification of low abundance peptides/proteins with nanoLC-MS.

The higher pressure capability of the NanoLC-Ultra platform allows the use of longer columns and/or columns packed with smaller particles for higher resolution separations of complex (digested) protein samples. Moreover, the NanoLC-Ultra family features self-priming and self-purging pumps for easier changing of solvents, and a temperature-controlled column compartment for maintaining exceptional retention time reproducibility.

Eksigent’s proven Microfluidic Flow Control™ (MFC) technology guarantees reliable and reproducible results, while integration with major mass spectrometer software packages makes the system a seamless addition to almost any nanoLC-MS workflow.

A range of different NanoLC-Ultra system configurations are available for various proteomics applications—from single gradient systems for direct sample injection, to dual gradient systems for multidimensional separations, and dual column set-up for increased throughput.

Key advantages of the new NanoLC-Ultra series

A NanoLC-Ultra system is the proteomics lab workhorse, delivering stable, reproducible gradient separations for peptide/protein identification, phosphopeptide analysis, biomarker discovery, metabolomics and more.

• Splitless, nano-scale flow control
  Eksigent’s Microfluidic Flow Control (MFC) technology uses fast flow measurement in combination with automatic feedback to a regulated pressure source to generate accurate and reproducible flow rates with a resolution better than 1 nl/min. By combining true microfluidic pump control with direct feedback of flow rate, the system eliminates the flow inaccuracies and plumbing problems caused by splitter-based systems. The result is extremely reproducible gradients down to 50 nl/min, without the use of flow splitting, and observed gradient reproducibility typically better than 0.5% RSD (see Figure 1). And the self-priming/self-purging design makes the NanoLC-Ultra pump even easier to set-up and run.

• 10,000 psi maximum pressure
  Ultra high pressure LC has been successfully applied in small molecule analyses using 2.1 mm ID columns for increased separation efficiencies and/or analysis speed. For the identification of proteins using LC-MS in proteomics, NanoLC is required because of the increased sensitivity obtained by nanospray mass spectrometry.
  The operating pressure of 10,000 psi obtained with the NanoLC-Ultra system enables the use of longer columns, or columns packed with smaller particles, for the analysis of increasingly complex proteomics samples.

• Retention time reproducibility
  Maintaining a constant column temperature is requisite to obtaining the best possible retention time reproducibility. To address this requirement, NanoLC-Ultra systems are equipped with a temperature-controlled column compartment with integrated 10-port valves, that can be regulated to a temperature up to 40°C.

  Elevated temperatures also can be utilized to decrease column pressure and/or improve separation efficiency. For advanced applications like sample pre-concentration or dual-column set-up, the NanoLC-Ultra system offers up to two 10-port nano valves rated at 10,000 psi that are integrated into the column compartment. These 10-port valves have an extremely low port-to-port volume of <25 nl, along with a proprietary coating that increases the lifetime of the valve and reduces sample loss.

• Peak parking
  Because of the excellent control over the flow rate offered by our MFC technology, the NanoLC-Ultra systems can operate in a “peak parking mode” where the flow rate is temporarily decreased by a factor up to 10 to facilitate longer MS interrogation of an analyte of interest. The result is extended MS/MS analysis acquisition time that improves the MS identification of co-eluting and low abundance peptides.
• Mass spec software integration
  With Eksigent’s Control Software, users can rapidly set-up experiments and create or modify methods in less than a minute. Specialized diagnostic tools make the system easy to learn, maintain and operate. The software continuously monitors pressure and flow rate, and provides real-time views of gradient composition and column backpressure. Plus, Eksigent’s software engineers placed special emphasis on integrating control of the NanoLC-Ultra systems into the major mass spectrometry software packages. Drivers are currently available for Thermo Electron’s Xcalibur®, Bruker Daltonics’ HyStar® (see figure 3) and ABI/Sciex Analyst® software packages.

Currently, four configurations of the NanoLC-Ultra series are available for proteomics researchers: the NanoLC-Ultra 1D, NanoLC-Ultra 1Dplus, NanoLC-Ultra 2D, and NanoLC-Ultra 2Dplus.

NanoLC-Ultra

The NanoLC-Ultra 1D system contains one binary gradient pump, allowing for direct on-column injections. The NanoLC-Ultra 1Dplus system adds an isocratic loading pump for sample enrichment experiments in which sample is loaded onto a trap column prior to analysis on a NanoLC column.

NanoLC-Ultra 2D systems include all of the features of the 1D, plus the added capability of automated 2-dimensional chromatography. The NanoLC-Ultra 2D (two gradients) system and NanoLC-Ultra 2Dplus system (two gradients and one isocratic loading pump) are designed for advanced applications such as on-line 2D LC or high throughput set-ups using two nanoLC columns.

All NanoLC-Ultra 2D and 2Dplus systems are available with one or two built-in 10-port valves. NanoLC-Ultra 2D and 2Dplus system can be configured to run in either 2-dimensional separation mode or as two parallel, completely independent binary gradient HPLC systems.

An AS-2 autosampler and PC-based instrument control software are available with all configurations of the NanoLC-Ultra series.

AS-2 autosampler

The new NanoLC-Ultra sits atop the new AS-2 autosampler and can be operated by our integrated Eksigent Control Software.

The flexible and easy-to-use autosampler employs a 2.4 ul volume needle for injection of small volumes without sample losses. The needle is coated with a proprietary inert coating on both the inside and outside to prevent sample losses due to adsorption. The sample compartment is completely enclosed to ensure temperature control down to 4°C. Capacity is two microtiter plates or 96 vials. Using two different wash positions, the needle is washed inside and outside to reduce carry-over. The 6-port injection valve has port-to-port volumes of <25 nl, and is rated to 10,000 psi. A proprietary coating on the valve stator and rotor assures excellent valve reliability and reduces sample adsorption.

Dimensions
14” x 24” x 18” (W x D x H)

Weight
70 lbs.

Working temperature
15º to 30ºC

Power
100-240 V AC, 400 VA

Maximum pressure
10,000 psi

Standard flow rate ranges

• Loading pump: 1-30 µl/min
• Nano gradient: 50-500 nl/min (up to 1000 nl/min at reduced maximum pressure)
• Micro gradient: 1-10 µl/min (up to 20 ul/min at reduced maximum pressure)

Flow rate accuracy
<1%

Flow rate precision
< 0.5% @ 200 nl/min

Gradient accuracy
<1% @ 200 nl/min

Gradient delay
<25 nl

Column oven
ambient + 5ºC to 40ºC (±1 ºC)

Built-in 10-port valve

• 1/32” connection; 0.1 mm bore; port-to-port
• Volume < 25 nl; max. pressure 10,000 psi
• Stainless Steel with proprietary coating on valve stator

Wetted parts
Valve stator
Stainless Steel, Titanium, PEEK, Fused Silica, FEP, proprietary inert coating

I/O
1 x USB for instrument control
2 x RS232 serial output

Each pump channel

• 2 x TTL in
• 4 x TTL out

Instrument control
Eksigent software with plug-ins for Thermo Electron’s Xcalibur®, Bruker Daltonics’ HyStar® and ABI/Sciex Analyst® software packages

Dimensions
14” x 24” x 14” (W x D x H)

Weight
up to 70 lbs., depending on configuration

Working temperature
15º to 30ºC

Power
100-240 VAC; 200 VA

Capacity
2 microtiter plates (96 high/low or 384 low) or 48/12 sample vial racks

Injection valve

• 1/32“ connection; 0.1 mm bore; port-to-port
• Port-to-port volume < 25
• Max. pressure 10,000 psi
• Stainless steel with proprietary coating on valve stator and rotor

Injection volume
programmable from 100 nl to 10 µl with standard 10 µl loop. Larger injection volumes possible with optional loop.

Dispenser syringe 25 µl standard; optional : 100 µl, 250 µl

Injection volume reproducibility

• full loop: RSD <0.8%
• partial loop: RSD <1%
• µl-pick-up: RSD <2%

Carry-over
<0.05%

Sample tray cooling
4ºC to ambient -3ºC (±2 ºC)

Wetted parts
Stainless Steel, PTFE, PEEK, Glass, Teflon, TEFZEL, fused silica, proprietary inert coating

I/O

• RS232 serial port for instrument control
• 1 programmable relay output
• 2 programmable TTL inputs

Instrument control
Eksigent software with plug-ins for Thermo Electron’s Xcalibur®, Bruker Daltonics’ HyStar® and ABI/Sciex Analyst® software packages