|
Material Database:
SRM 955c - Toxic Elements in Caprine Blood /Level 4
| |
|
| Type |
Certified reference material |
| Producer |
National Institute of Standards and Technology (NIST)
|
| Status |
Available |
| Material |
Liquid |
| Reference |
SRM 955c |
| Catalog (Web) |
https://www-s.nist.gov/srmors/view_detail.cfm?srm=955c |
| |
|
Description
|
SRM 955c - Toxic Elements in Caprine Blood /Levoxic Elements in Caprine Blood /Level 4
An alternative replacement material for SRM 966 is SRM 955c Toxic Elements in Caprine Blood, which was issued as Lead in Caprine Blood by NIST in 2007 with support from the CDC. SRM 955c is heavily relied upon for quality assurance of clinical blood Pb measurements, and is certified for Pb at four concentration levels: a base level and three progressively elevated levels. When SRM 955c was produced at the Wadsworth Center, New York State Department of Health (NYDOH), it was also spiked with As, Cd, iHg, MeHg, and EtHg. EtHg is a concern because it is a metabolite of Thimersol which has been used as a preservative in vaccines and is being studied in the proposed link between autism and Hg exposure. The toxicity of Hg is highly dependent on the chemical form, necessitating measurement of the specific Hg species. As, Cd, and THg are typically analyzed together as a “heavy metal screen” for diagnosis of acute poisoning utilizing a multi-element analysis method, inductively coupled plasma mass spectrometry (ICP-MS). Half of all blood analyses in the U.S. are performed using ICP-MS. SRM 955c will serve multiple measurement communities and is the first available whole blood CRM with EtHg and As values. keywords: biological materials , body fluids , blood , trace elements , heavy metals |
Package |
4 vials (levels of lead in blood)
Storage: The blood is shipped frozen (on dry ice) and, upon receipt, must be stored frozen until ready for use. The SRM should be kept in its original vials and stored frozen at or below –20 °C. The vials should be stored in the box and aluminized bag in which they are supplied. Frost-free freezers should not be used because of temperature fluctuations. Use: Before use, a frozen sample should be allowed to thaw at room temperature. The sample should be mixed by gently rocking or mildly swirling (not shaking) the vial to remix any water that may have separated on freezing. Shaking will cause bubbles to form at the top of the sample. Do not use if clotted. The contents of a vial may be thawed, a sample withdrawn, and the contents refrozen. Because of possible evaporative losses, it is advised that the contents of a vial not be used if less than one-third of the original blood volume remains. For the certified concentration to be applicable to an analytical determination, a minimum sample of 200 µL must be used.
|
Parameter
|
| Analyte | Arsenic | | Specification | total arsenic | | Parameter | Information Value | | Unit | µg/L | | Result | 77.5 +/- 4.2 | |
| Analyte | Cadmium | | Specification | total cadmium | | Parameter | Information Value | | Unit | µg/L | | Result | 9.85 +/- 0.17 | |
| Analyte | Lead | | Specification | total lead | | Parameter | Certified value | | Unit | µg/dL | | Result | 45.53 +/- 0.27 | |
| Analyte | Mercury | | Specification | total mercury | | Parameter | Information Value | | Unit | µg/L | | Result | 33.9 +/- 2.1 | |
|
|
